Wood CNC Router for Engraving and Carving
Model NO.: HT-1325
Spindle Layout: Spindle Over
Feed Mode: Manual
Certification: CE, ISO, SGS
Engraving Speed: 25000mm/Min
Mechanical Accuracy: <0.03/300mm
Spindle Power: 24000rpm
Software Compatibility: Type3 (Option: Artcam)
Operating System: DSP/Nc Studio
Type: Engraving Router
Spindle Number: Single-Spindle
Controlling Mode: CNC
Working Form: Full-Automatic
Data Transmission: PC Connect
Frame: Welded Structure
Table Surface: Vacuum and T-Slot Combined
Specification: CE, SGS, ISO
HS Code: 84649012
(***For cnc router,we offer you two years warranty***)
1. Main Introduction
With hard steel structure, the machine is fit for hard wood working, like cutting and engraving on rosewood for furniture, indoor decoration, and it is qualified for mass-producing of furniture with the vacuum holding way and dust collector. And our machine is with 2 years warranty.
2. Top components
We use top quality components for the machine, such as HSD spindle, Delta Inverter, Becker Vacuum pump, Hiwin linear and so on, to keep the machine in best condition even after working for many years.
1)The machine's body is strong, high-precision, reliable and durable.
2)Imported high-precision ball screw, which moving smoothly, to ensure the machine's high precision.
3)Well-known HSD spindle, strong cutting ability, low noise, to ensure the machine working for long time.
4)High-performance drive motor to ensure the machine's high speed and accuracy.
5)Perfect design, top quality accessories, to minimize the machine's failure rate.
6)Breakpoint specific memory to keep the carving status when power off, processing time forecast and other functions in case of the accidental power outages.
laser engraving machine, CNC plasma cutter, laser cutting machine, laser marking machine in China to the new and existing customers that are spread throughout the South America, Middle East, Southeast Asia, Africa, Europe and other counties of the world and the machines has passed the EU CE certificate.
|1||X,Y,Z Working Area||1300mmx2500mmx200mm|
|3||X,Y,Z Traveling Positioning Accuracy||±0.03/300mm|
|4||X,Y,Z Repositioning Accuracy||±0.03mm|
|5||Table Surface||Vacuum and T-slot Combined (Option: T-slot Table)|
|7||X, Y Structure||Rack and Pinion Drive, Hiwin Rail Linear Bearings|
|8||Z Structure||Hiwin Rail Linear Bearings and Ball Screw|
|9||Max. Power Consumption||3KW(Without Spindle)|
|10||Max. Rapid Travel Rate||33000mm/min|
|11||Max. Working Speed||25000mm/min|
|14||Drive Motors||Stepper System|
|15||Working Voltage||AC380V/50/60Hz,3Phs (Option: 220V)|
|16||Command Language||G Code|
|17||Operating System||DSP System(Options: Ncstudio/Syntec Software)|
|19||Flash Memory||128M(U Disk)|
|22||Software Compatibility||Type3 Software, (Option: Artcam Software)|
|23||Running Environment Temperature||0 - 45 Centigrade|
|24||Relative Humidity||30% - 75%|
|28||Optional Parts||Air Cooling Spindle or Water Cooling Spindle|
|Syntec Control System|
|850W Yaskawa/750W Panasonic Servo Motors|